Skip to content
FS Fab Blog

Le laiton est-il magnétique ? Tout ce qu'il faut savoir sur les propriétés magnétiques du laiton

Table des matières

Laiton is primarily an alloy of copper and zinc, and it is essentially non-magnetic. However, a brass component can still be attracted to a magnet if it has a steel core, magnets, or other ferromagnetic parts inside.

In this article, we explain why laiton may stick to magnets even though it’s non-magnetic. You’ll also learn about the magnetic behavior of various brass alloys, whether brass can be magnetized, and its uses.

Le laiton est-il magnétique ?

Brass is not magnetic. This is because it is an alloy of cuivre and zinc, neither of which is ferromagnetic. So, a standard magnet will not noticeably attract a brass part under normal conditions.
Brass TypeCompositionMagnetic Behavior
Cartridge brass (C260)70% Cu, 30% ZnNon-magnetic and low impurity risk
Free-machining brass (C360)61,51 TP3T de cuivre, 35,51 TP3T de zinc, 31 TP3T de plombNon-magnetic since lead is not magnetic
Red brass (C230)85% Cu, 15% ZnNon-magnetic with high copper content
Naval brass (C464)60% Cu, 39% Zn, 0.75% SnNon-magnetic when certified
Brass-plated steelSteel core, thin brass coatingMagnetic, but the steel core responds, not the coating

Why Brass Is Not Magnetic

Magnetism in metals like iron, nickel, and cobalt comes from unpaired electrons in the atoms’ outer shells. These unpaired electrons have magnetic moments that align under an applied field, producing the strong attraction we associate with ferromagnetism.
In contrast, brass lacks these unpaired electrons, which is why it is not magnetic. This is because it inherits the behaviour of copper and zinc, which have no unpaired electrons capable of forming the magnetic domains.
Solid brass is essentially non-magnetic and is not normally attracted to a static magnet.

Can Brass Be Magnetized?

Brass is not usually a material that can be magnetized like iron or steel to form permanent magnetism. Since brass is a mixture of copper and zinc metals, it does not easily show any magnetic property.
Condition Behavior of Brass
Near an ordinary magnet Usually not noticeably attracted to the magnet.
Exposed to an external magnetic field Exhibits a very weak magnetic response that is generally difficult to detect under normal conditions.
After the external magnetic field is removed Ordinary brass does not retain significant magnetization like ferromagnetic materials.
Near a moving strong magnet May experience noticeable resistance to motion due to eddy currents, but this does not mean the brass has become permanently magnetized.
Steel, iron, and nickel retain a certain degree of magnetism even after the magnetic field is removed; this is because their ferromagnetic domains can permanently rearrange themselves, whereas brass does not possess this property.

Why a Brass Part May Sometimes Stick to a Magnet

While brass is not magnetic, some brass parts are said to stick to a magnet. This phenomenon is not magic, but a behavior that can be attributed to several main causes below.
  • Brass-plated steel: A thin brass coating over a steel or iron core looks and feels like solid brass. However, the steel core attracts a magnet, which makes it look like it is brass.
  • Steel inserts or other magnetic components: Some components identified as brass components have steel screws, pins, springs, threaded inserts, or any other ferromagnetic components. In case of magnetic attraction in a particular region, look for such components.
  • Iron contamination and machining residue: Recycled brass scrap can carry iron traces that become dissolved during casting. Also, steel tooling wear during Usinage CNC can leave ferrous particles on the part’s surface. Cleaning the surface and repeating the magnet test can help determine whether the attraction comes from surface debris.

Test Brass Parts Before Use

A simple magnetic test can quickly check the magnetic behavior of brass components before use. This test is particularly useful for inspecting purchased parts or determining if a component contains magnetic materials.

The assessment of the magnetic characteristics of brass will be helpful in deciding if the material is fit for a particular purpose by engineers, product designers, and purchasers. This will especially matter when dealing with parts used in precise instruments, sensor assemblies, and electrical products, because magnetic behavior may affect performance.

Standard brass is generally non-ferromagnetic, so it is not strongly attracted to an ordinary magnet. However, a magnet test can serve as a preliminary screening method to identify potential issues with the matériel or construction, such as a steel core, magnetic inserts, or iron-based contamination.

Magnet Test for Brass

A simple field test is enough for most situations to identify if brass is magnetic. Here’s how to do it step by step.
  • Clean the surface first. This helps to remove oils, dust, and fine metal shavings, which can carry enough ferrous content to produce a false positive on a sensitive rare-earth magnet.
  • Test with a strong magnet, such as a neodymium rare-earth magnet, at multiple points across the part.
  • Scratching a small, inconspicuous area may reveal a different underlying metal or coating layer, but appearance alone cannot confirm that a part is solid brass. For critical components, verify the specified alloy using material documentation and suitable testing methods.
  • Scratch or file a small area on a hidden surface. If the material exposed at the scratch is consistently golden in color, it is most likely solid brass. Otherwise, a grey or silver surface beneath confirms brass plating over a ferrous base.
For certified non-magnetic applications, this field test is not enough. Instead, request a mill test certificate, or use XRF to verify the brass composition and check for elements that could affect its magnetic behavior.

Applications That Require Verified Non-Magnetic Brass

Applications-of-Non-Magnetic-Brass
The magnetic properties of brass may matter in applications where magnetic interference must be controlled.
  • MRI and medical imaging rooms: Hardware and fittings near scanner bores need verified non-magnetic material. This is because even a trace of ferromagnetic content can cause imaging artifacts or create projectile risk in high-field MRI environments.
  • Marine : Valves, fittings, fasteners, and other ship parts use non-magnetic alloys to avoid magnetic influence. This is why naval brass (C464) is commonly used in this context.
  • Aerospace and sensor housings: Components near magnetometers, compasses, or sensitive electronics need material like brass that will not introduce magnetic interference.
  • Compass and binnacle fittings: For accurate and precise compass readings, a compass binnacle is made of brass because it does not introduce unwanted magnetic effects.
For these applications, always request a mill certificate confirming alloy composition rather than assuming the material is correct based on appearance or a basic magnet test.

Conclusion

Brass itself is non-magnetic. This is because the alloy is mainly made of copper and zinc, which are both diamagnetic. The same non-magnetic behaviour is also exhibited by most brass types, such as red, leaded, and naval brass.

A magnet test for brass can help identify potential material or construction issues, such as brass-plated steel parts or components containing magnetic inserts, but it cannot confirm the exact alloy composition.

For CNC-machined brass parts, material selection should consider more than magnetic properties alone. Brass grade, electrical conductivity, corrosion resistance, machinability, and application-specific requirements all influence whether a material is suitable for a component.

Need brass parts that require non-magnetic performance?

FS Fab fournit custom CNC machining solutions for components manufactured according to your dessins and specifications. To help our team evaluate manufacturability and prepare a suitable quotation, share your part drawings, required brass grade, quantity, dimensional tolerances, and surface finish requirements.

FAQ

Can brass become magnetic over time?
The brass alloy itself does not change its magnetic character. However, brass parts may change over time due to contamination accumulating on the surface. The change may also occur due to wear exposing a plated steel core, or embedded ferrous particles from machining becoming more concentrated near the surface.
Is bronze non-magnetic like brass?
Bronze is primarily copper and tin, and neither element is ferromagnetic, just like copper and zinc in brass. So, a standard tin bronze is reliably non-magnetic. However, nickel and aluminum bronze grades containing iron additions can show weak magnetic response.
Does leaded brass behave differently around magnets?
Lead is non-magnetic, so adding it to brass for machinability does not affect the alloy's magnetic behavior. Only ferromagnetic contaminants iron, nickel, and cobalt change the result.

Besoin de pièces sur mesure ?

Soumettez vos demandes maintenant

A propos de l'auteur

Pas encore de commentaire, ajoutez votre voix ci-dessous !


Ajouter un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Derniers messages
Lead Screw

Lead Screw: How It Works, Specs, Types, and Uses

A lead screw is a mechanical component that converts rotary motion into linear motion through a threaded shaft
Automated Part Quality Inspection

Common CNC Machining Defects and How to Prevent Them

CNC defect rates are reduced by designing out risky features, setting tolerances by function, selecting machinable materials, and minimizing setups and tool wear
technician operating a heavy-duty industrial CNC machine with a digital control monitor interface

Why CNC Machining Quotes Differ: What Buyers Should Check

Quotes for the same part can differ 3x. CNC supplier prices vary by machining time, tolerance, material markup, volume and overhead